Figure 32. Removing the system battery
1. plastic scribe 2. positive side of the battery connector
3. securing tabs
3. Install a new system battery by holding the battery with the "+" sign facing up and slide it under the
securing tabs.
4. Press the battery into the connector until it snaps into place.
Figure 33. Installing the system battery
1. positive side of the battery connector 2. battery connector
Next steps
1. Follow the procedure listed in After working inside your system.
2. While booting, press F2 to enter System Setup and ensure that the battery is operating properly.
3. Enter the correct time and date in the System Setup Time and Date fields.
4. Exit System Setup.
87
To Next Page
Loading...
