|===============================================================|
| 0-0| Online| OK | N201DL43 | 111.79GB| None | 0% |
| 1-1| Online| OK | N201DL43 | 111.79GB| None | 0% | *
2. Verify that the status for the BOSS card is "OK". Verify that the state for both
M.2 cards is "Online" and the statuses are "OK".
3. Verify that the RAID mirror is healthy:
a. Log into iDRAC on the server.
b. From the Dashboard, navigate to Storage > Overview > Virtual Disks.
c. Use the Status, State, and Layout columns to verify that RAID is healthy and
online.
Remove and replace NIC cards
NIC cards are not hot-swappable and require a system shutdown.
Network daughter card
The network daughter card (NDC) is a small, removable mezzanine card, which
provides the flexibility of selecting different network connectivity options. The
network interface controller (NIC) ports that are integrated on the NDC provide
network connectivity.
Network Interface Controller (NIC) ports
The DP4400 supports up to four SFP+ ports that support up to 10 Gbps that are
integrated on the network daughter card (NDC) .
Identifying a failed NIC from the ACM
If the NIC is suspected of failing, you can check the web UI or use the FRU command
line verification from the ACM.
Procedure
1. Access the web UI and check for alerts in the Health screen. Click an alert for
more details.
2. Log in to the ACM command line by using SSH.
Use root for the user, and use the common password for the appliance.
3. At the command line, type the following command: # showfru network
The screen displays that the system is collecting data. When the data collection
is completed, the screen displays status information for the ports on the NIC.
acme-dp4400-ACM:~ # showfru network
Collecting Data............
______________________________________________________________________________
| Name | Port| Link Status| Model Name |
|=============================================================================|
| NIC Integrated 1| 1 | Up | Ethernet 10G 4P X710 SFP+ rNDC |
| NIC Integrated 1| 2 | Error | Ethernet 10G X710 rNDC |
| NIC Integrated 1| 3 | Down | Ethernet 10G X710 rNDC |
| NIC Integrated 1| 4 | Down | Ethernet 10G X710 rNDC |
| NIC Slot 1 | 1 | Down | Ethernet Converged Network Adapter X710|
| NIC Slot 1 | 2 | Down | Ethernet Converged Network Adapter X710|
| NIC Slot 1 | 3 | Down | Ethernet Converged Network Adapter X710|
| NIC Slot 1 | 4 | Down | Ethernet Converged Network Adapter X710|
| NIC Slot 2 | 1 | Up | Gigabit 2P I350-t Adapter |
Remove and replace assemblies
Remove and replace NIC cards 51
To Next Page
Loading...
