Dell EMC VxFlex Ready Node R740xd - Viewing Events; Viewing Events Locally

Message: message describing the event. Some event notification message verbosity
may be expanded by using the full switch (see “Viewing events locally”).
The following is an example of a possible event notification:
139 2013-07-22 17:21:11.694571 CLI_COMMAND_RECEIVED
INFO Command MAP_VOL_TO_SCSI_INITIATOR Received
This event has the option of extended verbosity. When requested, the event
notification will be displayed as follows:
139 2013-07-22 17:21:11.694571 CLI_COMMAND_RECEIVED
INFO Command MAP_VOL_TO_SCSI_INITIATOR Received Vol
Name: snap_raw; SCSI Initiator Name: ini-21
bAllocateLunNum: 1 lunNum: 0
The following is a breakdown of the event according to the fields in the event record
(as described above):
Parameter Description
ID 139
Date 2013-07-22 17:21:11.694571
Name CLI_COMMAND_RECEIVED
Severity INFO
Message Command MAP_VOL_TO_SCSI_INITIATOR
Received
Extended Command MAP_VOL_TO_SCSI_INITIATOR
Received Vol Name: snap_raw; iSCSI Initiator
Name: ini-21 bAllocateLunNum: 1 lunNum: 0
Viewing events
You can view events in the following ways:
l
on a local server
l
via Syslog
l
via email
To configure events via email, see the EMC Secure Remote Services Installation and
Operations Guide .
Viewing events locally
Events can be viewed by running the following command, and by using switches to
filter the data.
Command:
showevents.py
System events
Dell EMC VxFlex Ready Node AMS User Guide 277