Dell EMC VxFlex Ready Node R740xd - Single-Node R730 Xd (2 U1 N) Server (Storage Only) Typical Connection Diagram; Single-Node R730 Xd (2 U1 N) Server (Converged) Typical Connection Diagram

The iDRAC IP address can reside on a different subnet and/or VLAN, and the only
requirement from the iDRAC side is that the AMS must have a routable IP Path to the
iDRAC IP address on the node.
Figure 4 Single-node R730xd (2U1N) server (storage only) typical connection diagram
Figure 5 Single-node R730xd (2U1N) server (converged) typical connection diagram
Architecture
44 Dell EMC VxFlex Ready Node AMS User Guide