Dell Force10 MXL Blade Getting Started Guide

34 Technical Specifications
Technical Specifications
The MXL 10/40GbE Switch is an I/O module and installed with Server
(model: PowerEdge M1000e) for communication.
The product should be operated at an ambient temperature of 50°C.
CAUTION:
Lithium Battery Caution: There is a danger of explosion if the
battery is incorrectly replaced.
Replace only with same or equivalent type. Dispose batteries according to
manufacturer's instructions.
Chassis Physical Design
Environmental Parameters
Parameter Specifications
Height 1.32 inches ( 33.45 mm )
Width
10.81 inches ( 274.75 mm)
Depth 12.17 inches (309.24 mm)
Parameter Specifications
Operating temperature 32° to 104°F (0° to 40°C)
Operating humidity 10 to 85% (RH), non-condensing
Storage temperature –40° to 158°F (–40° to 70°C)
Storage humidity 5 to 95% (RH), non-condensing
Maximum thermal output 419.7 BTU/hr

Dell Force10 MXL Blade Specifications

General

Switching Capacity	1.28 Tbps
Forwarding Rate	952 Mpps
Product Type	Blade Switch
Latency	< 3 microseconds
Operating Temperature	0°C to 40°C (32°F to 104°F)
Redundancy	Yes
Management	CLI, SNMP, Web
Layer Support	Layer 2, Layer 3
Jumbo Frame Support	Up to 9216 bytes
Management Ports	1 x 10/100/1000 Mbps
Storage Temperature	-40°C to 70°C
Weight	4.5 kg (9.9 lbs)