12
About your monitor
Monitor specifications
Table 7. Monitor specifications.
Description Value
Screen type Active matrix-TFT LCD
Panel type In-Plane Switching Technology (IPS)
Viewable area
Diagonal 684.66 mm (27 in.)
Active area
Horizontal 596.74 mm (23.49 in.)
Vertical 335.66 mm (13.22 in.)
Area 2003.02 cm² (310.54 in.²)
Pixel pitch 0.2331 mm x 0.2331 mm
Pixel per inch (PPI) 109
Viewing angle
Horizontal 178° (typical)
Vertical 178° (typical)
Brightness 400 cd/m² (typical)
Contrast ratio 1000:1 (typical)
Faceplate coating Haze 25%, 3H
Backlight LED Edgelight System
Response time 5 milliseconds (gray to gray - off mode)
4 milliseconds (gray to gray - 1 Mode)
2 milliseconds (gray to gray - 2 Mode)
1 millisecond (gray to gray - 3 Mode)*
*The 1 millisecond gray-to-gray mode is achievable in the 3 mode to reduce visible motion
blur and increased image responsiveness. However this may introduce some slight and
noticeable visual artifacts into the image. As every computer setup and every user's needs
are different, we recommend that users experiment with the different modes to find the
setting that is right for them.
Color depth 1.07 Billion colors
Color gamut sRGB 99% (CIE 1931)
Connectivity • One DisplayPort 1.4 (HDCP 2.2) (Supports up to QHD 2560 x 1440 180 Hz)
• Two HDMI 2.1 (HDCP 2.2) (Supports up to QHD 2560 x 1440 144 Hz TMDS）
• One Headphone out
Bezel width (edge of monitor to active
area)
8.5 mm (0.33 in.) (Top)
8.5 mm (0.33 in.) (Left/Right)
22.2 mm (0.87 in.) (Bottom)
Security Security lock slot (cable lock sold separately)
Tilt angle -5° /+ 15°
To Next Page
Loading...
