15
About your monitor
Electrical specifications
Table 11. Electrical specifications.
Description Value
Video input signals
• HDMI 2.1, 600 mV for each differential line, 100 Ω input impedance per differential pair.
• DP 1.4, 600 mV for each differential line, 100 Ω input impedance per differential pair.
AC input voltage/frequency/
current
100 VAC to 240 VAC/50 Hz or 60 Hz ± 3 Hz/1.5 A(maximum)
Inrush current
• 120 V : 30 A (maximum) at 0°C (cold start)
• 240 V : 60 A (maximum) at 0°C (cold start)
Power Consumption
• 0.3 W (Off Mode)
1
• 0.3 W (Standby Mode)
1
• 24 W (On Mode)
1
• 42.5 W (Max)
2
• 25 W (P
on
)
3
• 77.87 kWh (TEC)
3
1
As defined in EU 2019/2021 and EU 2019/2013.
2
Max brightness and contrast setting.
3
P
on
: Power consumption of On Mode that is measured with reference to the Energy Star test method.
TEC: Total Energy Consumption in kWh that is measured with reference to the Energy Star test method.
This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the software,
components, and peripherals you ordered, and you shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making decisions about electrical tolerances or otherwise. No warranty
as to accuracy or completeness is expressed or implied.
To Next Page
Loading...
