● PowerEdge R750XS
● PowerEdge T550
● PowerEdge XR11
● PowerEdge XR12
● PowerEdge T150
● PowerEdge R350
● PowerEdge R250
● PowerEdge T350
PowerEdge systems supported by Dell HBA350i MX
The following PowerEdge system support the controller:
● PowerEdge MX750c
PowerEdge systems supported by Dell HBA350i
Adapter
The following PowerEdge systems support the controller:
● PowerEdge R640
● PowerEdge R740
● PowerEdge R740XD
● PowerEdge T640
● PowerEdge R440
● PowerEdge R540
● PowerEdge T440
Operating systems supported by Dell HBA355i
Adapter, Dell HBA355i Front, Dell HBA355e Adapter,
Dell HBA350i MX, and Dell HBA350i Adapter
See Dell Technologies Enterprise operating systems support for a list of supported operating systems by a specific server for
the Dell HBA355i Adapter cards.
NOTE:
For the latest list of supported operating systems and driver installation instructions, see the operating system
documentation at www.dell.com/operatingsystemmanuals. For specific operating system service pack requirements, see the
Drivers and Downloads section at www.dell.com/manuals.
MD1400 and MD1420 enclosure support for Dell
HBA355e Adapter
Dell HBA355e Adapter supports external enclosures MD1420 and MD1400.
The MD enclosure topology rules for Dell HBA355e Adapter are:
● The maximum number of enclosures supported for single-path configuration is eight, and dual-path configuration is four.
● A maximum of two enclosures are supported per port when using a daisy chain topology.
● MD1400 and MD1420 can be connected to the same controller at the same time.
● Mixing of MD and ME enclosures or mixing tape drives and MD or ME enclosures on the same controller is not supported.
● Loopback connections of enclosures are not supported.
● Mixing of single-path and dual-path configurations on the same controller is not supported.
● Interleaving of port for multipath configuration is not supported.
Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, and Dell HBA350i Adapter
11
To Next Page
