Dell HBA355e - Applications Supported by Dell HBA355 i Adapter, Dell HBA355 i Front, Dell HBA355 e Adapter, Dell HBA350 i MX, and Dell HBA350 i Adapter; Human Interface Infrastructure Configuration Utility; Dell OpenManage Storage Management; Integrated Dell Remote Access Controller and Lifecycle Controller

Applications supported by Dell HBA355i
Adapter, Dell HBA355i Front, Dell HBA355e
Adapter, Dell HBA350i MX, and Dell HBA350i
Adapter
The Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, and Dell HBA350i Adapter
management applications include the Human Interface Infrastructure Configuration Utility (HII), Dell OpenManage Storage
Management, command line interface, the Integrated Dell Remote Access Controller (iDRAC), and Lifecycle Controller (LC).
They enable you to manage and configure the system, create and manage a disk group, and provide online maintenance.
Topics:
• Human Interface Infrastructure Configuration Utility
• Dell OpenManage Storage Management
• The Integrated Dell Remote Access Controller and Lifecycle Controller
• The Command Line Interface
Human Interface Infrastructure Configuration Utility
The Human Interface Infrastructure (HII) configuration utility is a storage management application integrated into the System
BIOS <F2>. It is used to configure physical disks. This utility is independent of the operating system. For more information about
HII, see HII configuration utility.
Dell OpenManage Storage Management
Dell OpenManage Storage Management enables you to perform controller and enclosure functions for all supported RAID or
Non-RAID controllers and enclosures from a single graphical or command line interface. For more information, see the Dell
OpenManage Storage Management User's Guide at www.dell.com/openmanagemanuals.
The Integrated Dell Remote Access Controller and
Lifecycle Controller
The Integrated Dell Remote Access Controller (iDRAC) and Lifecycle Controller (LC) application enables you to effectively
monitor the network controllers installed on the system using iDRAC and LC without an operating system installed on the
system. For more information, see the Integrated Dell Remote Access Controller 9 User's Guide at www.dell.com/idracmanuals.
The Command Line Interface
The Command Line Interface (CLI) is a storage management application. This utility allows you to set up, configure, and manage
your Dell Technologies Host Bus Adapter by using the Command Line Interface (CLI).
NOTE:
For more information, see Dell EMC PowerEdge RAID Controller CLI Reference Guide at www.dell.com/
storagecontrollermanuals.
2
14 Applications supported by Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, and
Dell HBA350i Adapter