Table 9. Device at Slot 0 Logical Enclosure 1 properties (continued)
Option Description
Protocol The drive protocol
Slot number Drive slot number in the enclosure
Connector name Name of the port as displayed in the utility
Vendor name Vendor name of the drive
Product name Product name of the drive
Revision name Revision version of the drive
Serial number Serial number of the drive
Capacity Capacity of the drive
Logical/Physical sector size Sector size of the selected drive
Multipath device Drive supports multipath or not
SAS address SAS address of the drive
Negotiated logical link rate Negotiated logical link rate of the device
Negotiated physical link rate Negotiated physical link rate of the device
Maximum drive rate Maximum possible drive rate
Write cache You can either enable or disable the Write Cache
Locate LED You can either select On or Off the locate LED
Legacy OpROM boot device You can either select Yes or No
3. Click Apply Changes to submit the changes selected.
A confirmation screen is displayed. Click Ok to continue.
4. To choose another device click Next Device in this Enclosure.
Manage Dell HBA355i Adapter, Dell HBA355i Front, Dell HBA355e Adapter, Dell HBA350i MX, and Dell HBA350i
Adapter using HII configuration utility
41
To Next Page
Loading...
