Steps
Place the palm-rest and keyboard assembly on a flat and clean surface and perform the tasks in Next steps to install the
palm-rest and keyboard assembly.
NOTE:
The palm-rest and keyboard assembly consists of the following:
● Palm-rest
● Keyboard
● Touchpad
Next steps
1. Install the speakers.
2. Install the system board.
3. Install the power button with optional fingerprint reader.
4. Install the power-button board.
5. Install the left fan and the right fan.
6. Install the I/O board.
7. Install the power-adapter port.
8. Install the heat sink.
9. Install the display assembly.
10. Install the wireless card.
11. Install the battery.
12. Install the base cover.
13. Follow the procedure in After working inside your computer.
Removing and installing components
53
To Next Page
Loading...
