Removing the solid-state drive
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.
CAUTION: To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the base cover.
2. Remove the battery.
Procedure
NOTE:
Remove the solid-state drive bracket, if applicable.
1. Remove the screw (M3x3) that secures the solid-state drive to the palm rest and keyboard assembly.
2. Slide and remove the solid-state drive from the solid-state drive slot.
29
Removing the solid-state drive 43
To Next Page
Loading...
