Removing the power-adapter port
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the memory module.
4. Remove the wireless card.
5. Remove the fan (for computer with integrated graphics card)
6. Remove the heat sink (for computer with integrated graphics card).
7. Remove the heat-sink assembly (for computer with discrete graphics card).
8. Remove the solid-state drive.
9. Follow the procedure from step 1 to step 2 in “Removing the hard drive”.
10. Remove the system board.
11. Remove the display assembly.
Procedure
1. Note the power-adapter port cable routing and remove it from the routing guides on the palm rest and keyboard assembly.
2. Remove the screw (M2x3) that secures the power-adapter port to the palm rest and keyboard assembly.
3. Lift the power-adapter port off the palm rest and keyboard assembly.
35
Removing the power-adapter port 51
To Next Page
Loading...
