Base panel
Removing the base panel
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the stand.
3. Remove the back cover.
4. Remove the I/O cover.
5. Remove the hard drive.
6. Remove the system-board shield.
7. Remove the speakers.
8. Remove the fan.
9. Remove the coin-cell battery.
10. Remove the retractable-camera assembly.
11. Remove the memory module.
12. Remove the wireless card.
13. Remove the M.2 2230 solid-state drive or M.2 2280 solid-state drive, as applicable.
14. Remove the heat sink.
15. Remove the media-card reader.
16. Remove the system board.
17. Remove the microphones.
18. Remove the display hinges.
19. Remove the power-button board.
20. Remove the antennas.
21. Remove the display panel.
About this task
The following image indicates the location of the base panel and provides a visual representation of the removal procedure.
Removing and installing components
65
To Next Page
Loading...
