Table 10. System setup options—Power menu
Power
USB PowerShare
Enable USB PowerShare Enables or disables USB PowerShare.
Default: OFF
USB Wake Support
Enable USB Wake Support Enables or disables USB Wake Support.
Default: ON
AC Behavior
AC Recovery Enables to recover the last power state.
Default: Power Off
Block Sleep Blocks the computer from entering Sleep (S3) mode in the operating system.
Default: OFF
NOTE: If enabled, the computer will not go to sleep, Intel Rapid Start will
be disabled automatically, and the operating system power option will be
blank if it was set to Sleep.
Deep Sleep Control
Deep Sleep Control Enable or disable the deep sleep control.
Default: Disabled
Intel Speed Shift Technology Enables or disables the Intel Speed Shift Technology support. Setting this
option to enable allows the operating system to select the appropriate
processor performance automatically.
Default: ON
Table 11. System setup options—Security menu
Security
Intel Speed Shift Technology
Intel Speed Shift Technology Enable or disable the Intel Speed Shift Technology feature in the OS.
Default: ON
Intel Platform Trust Technology
Intel Platform Trust Technology On Enable or disable the Intel Platform Trust Technology (PTT) feature in the OS.
Default: ON
PPI Bypass for Clear Commands Enables or disables the Trusted Platform Model (TPM) Physical Presence
Interface (PPI). When enabled, the OS will skip BIOS Physical Presence
Interface (PPI) user prompts when issuing the Clear command.
Default: OFF
Clear Enables or disables the computer to clear the PTT owner information, and
returns the PTT to the default state.
Default: OFF
SMM Security Mitigation Enables or disables additional UEFI SMM Security Mitigation protections.
Default: OFF
NOTE: This feature may cause compatibility issues or loss of functionality
with some legacy tools and applications.
System setup 75
To Next Page
Loading...
