Table 14. System setup options—System Management menu (continued)
System Management
Auto On Time Controls automatic powering up of system for defined days and times.
Default: Disabled
First Power On Date
Set Ownership date Enables to set the ownership date.
Default: OFF
Diagnostics
OS Agent Requests Enables OS agent requests.
Default: ON
Power-on-Self-Test Automatic
Recovery
Power-on-Self-Test Automatic Recovery Enables or disables Power-on-Self-Test Automatic Recovery.
Default: ON
Table 15. System setup options—Keyboard menu
Keyboard
Keyboard Errors
Enable keyboard Error Detection Enables or disables keyboard Error Detection.
Default: ON
Numlock LED Enables or disables Numlock LED.
Default: ON
Table 16. System setup options—Pre-boot Behavior menu
Pre-boot Behavior
Adapter warnings
Enable Adapter warnings Enables or disables the computer to display adapter warning messages when
adapters with too little power capacity are detected.
Default: ON
Warnings and Errors Selects an action on encountering a warning or error during boot.
Default: Prompt on Warnings and Errors. Stop, prompt, and wait for user input
when warnings or errors are detected.
NOTE: Errors deemed critical to the operation of the computer hardware
will always halt the computer.
Fastboot Configures the speed of the UEFI boot process.
Default: Thorough. Performs complete hardware and configuration initialization
during boot.
Extend BIOS POST Time Configures the BIOS POST (Power-On Self-Test) load time.
Default: 0 seconds
Table 17. System setup options—Virtualization menu
Virtualization
Intel Virtualization Technology
78 System setup
To Next Page
Loading...
