Removing the back cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
Remove the stand.
Procedure
CAUTION: Do not remove the computer cover unless you need to install
internal accessories for your computer.
1 Using a plastic scribe, pry the back cover from the display assembly.
2 Lift the back cover off the computer.
1
back cover 2 display assembly
3 plastic scribe
19
To Next Page
Loading...
