Removing the processor
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the stand.
2 Remove the back cover.
3 Remove the heat sink.
Procedure
NOTE: To avoid damaging the processor, handle the processor only by the
edges.
1 Press the release lever down and then pull it outward to release it from the
securing tab.
2 Extend the release lever completely to open the processor cover.
46
To Next Page
Loading...
