Replacing the microphone
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
NOTE: The left and right microphones cannot be swapped. Note the
location so that you can replace them correctly.
1 Connect the microphone cable to the microphone board.
2 Slide the microphone board into the slot on the display bezel.
3 Route the microphone cable through the routing guides on the middle cover.
Post-requisites
1 Replace the back cover.
2 Replace the stand.
52
To Next Page
Loading...
