Replacing the speaker cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align the screw holes on the speaker cover with the screw holes on the middle
cover and snap the speaker cover into place.
2 Replace the screws that secure the speaker cover to the middle cover.
Post-requisites
1 Replace the back cover.
2 Replace the stand.
67
To Next Page
Loading...
