Removing the rubber feet
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the stand.
2 Remove the back cover.
3 Remove the optical drive.
4 Remove the hard drive.
5 Remove the wireless card.
6 Remove the heat sink.
7 Remove the fan.
8 Remove the system board.
9 Remove the VESA-mount bracket.
10 Remove the speaker cover.
11 Remove the middle cover.
Procedure
1 Remove the screw that secures the rubber foot to the display assembly.
81
To Next Page
Loading...
