Dell Inspiron 24 5459 - Removing the Optical Drive; Procedure; Post-requisites

Removing the optical drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align the screw hole on the optical-drive bracket with the screw hole on the
optical drive.
2 Replace the screw that secures the optical-drive bracket to the optical drive.
3 Align the tabs on the optical-drive bezel with the slots on the optical-drive
assembly and snap it into place.
4 Slide the optical-drive assembly into the optical-drive bay and align the screw
hole on the optical-drive bracket with the screw hole on the middle cover.
5 Replace the screw that secures the optical-drive assembly to the middle cover.
6 Connect the optical-drive cable to the optical-drive assembly.
Post-requisites
1 Replace the back cover.
2 Replace the stand.
24