Dell Inspiron 24 5459 - Replacing the Rubber Feet; Procedure; Post-requisites

Replacing the rubber feet
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align the screw holes on the rubber foot with the screw holes on the display
bezel.
2 Replace the screw that secures the rubber foot to the display assembly.
Post-requisites
1 Replace the middle cover.
2 Replace the speaker cover.
3 Replace the VESA-mount bracket.
4 Replace the system board.
5 Replace the fan.
6 Replace the heat sink.
7 Replace the wireless card.
8 Replace the hard drive.
9 Replace the optical drive.
10 Replace the back cover.
11 Replace the stand.
83