Table 30. System setup options—Integrated Devices menu(continued)
Integrated Devices
Audio
Enable Audio Enable or disable the integrated audio controller.
By default, all the options are enabled.
USB Configuration
● Enable or disable booting from USB mass storage devices that are
connected to external USB ports.
By default, all options are enabled.
Table 31. System setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation Set the operating mode of the integrated storage device controller.
By default, the RAID On option is enabled.
Storage interface
Port Enablement This page allows you to enable the onboard drives.
By default, all the options are enabled.
SMART Reporting
Enable SMART Reporting Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during system startup.
By default, the Enable SMART Reporting option is not enabled.
Drive Information
SATA-0
Type Displays the SATA-0 type information of the system.
Device Displays the SATA-0 device information of the system.
M.2 PCIe SSD
Type Displays the M.2 PCIe SSD type information of the system.
Device Displays the M.2 PCIe SSD device information of the system.
Table 32. System setup options—Display menu
Display
OSD Button management
Disable OSD Buttons Enable or disable the OSD (On-Screen Display) buttons of the system.
By default, the option is disabled.
Full Screen Logo Enable or disable full screen logo.
By default, the option is not enabled.
Table 33. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC Displays the options for on-board LAN controller.
By default, the Enabled with PXE option is selected.
Wireless Device Enable
102 BIOS Setup
To Next Page
Loading...
