● Phillips screwdriver #0
● Phillips screwdriver #1
● Plastic scribe
Screw list
NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE: Screw color may vary with the configuration ordered.
Table 25. Screw list
Component Screw type Quantity Screw image
I/O cover M3x5 5
Hard-drive assembly M3x5 1
Hard-drive bracket M3x3.5 4
System-board shield M3x5 4
Wireless-card bracket M2x3.5 1
M.2 2230/M.2 2280 solid-sate
drive
M2x3.5 1
Solid-state drive screw mount M3x4 1
Retractable camera assembly M3x5 2
Fan M2x3.5 3
Stand hinges M3x4.5 10
Media-card reader M3x3.5 1
Power-button board M3x5 1
System board M3x5 6
Microphones M2x2.5 4
38 Working inside your computer
To Next Page
Loading...
