Figure 56. System-board connectors
1.
Solid-state drive slot 2. Touchscreen-cable connector (optional)
3. Camera-cable connector 4. Backlight-cable connector
5. Fan-cable connector 6. Coin-cell battery
7. Memory-module slots 8. Speaker-cable connector
9. Microphone-module cable connector 10. Media-card reader cable connector
11. Wireless-card slot 12. Power-button board cable connector
13. Display-cable connector 14. Hard-disk drive connector
The following image indicates the location of the system board and provides a visual representation of the installation procedure.
84
Removing and installing Field Replaceable Units (FRUs)
To Next Page
Loading...
