Replacing the computer cover
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1. Align the tabs on the computer cover with the slots on the chassis and slide it towards the front of the computer until it snaps into
place.
2. Replace the two screws (#6-32x6.35) that secure the computer cover to the chassis.
3. Place the computer in an upright position.
7
16 Replacing the computer cover
To Next Page
Loading...
