Removing the 2.5-inch hard drive
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1. Disconnect the power cables and the data cables from the hard drive.
2. Remove the screw (#6-32x3.6) that secures the hard-drive assembly to the drive cage.
3. Slide and lift the hard-drive assembly out of the slot on the drive cage.
12
Removing the 2.5-inch hard drive 23