Removing the antenna modules
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1. Remove the computer cover.
2. Remove the front bezel.
3. Follow the procedure from step 1 to step 6 in “Removing the optical drive”.
4. Remove the wireless card.
Procedure
1. Note the antenna-cable routing and remove the antenna cables from the routing guide on the chassis.
2. Using a plastic scribe, gently pry the antenna modules off the side-chassis.
3. Remove the antenna modules, along with its cables, off the chassis.
26
Removing the antenna modules 47
To Next Page
Loading...
