4. Remove the four screws (M3x3.5) that secure the top hard drive to the hard-drive bracket.
5. Lift the top hard drive off the hard-drive bracket.
NOTE:
Note the orientation of the hard drive so that you can replace it correctly.
6. Remove the four screws (M3x3.5) that secure the bottom hard drive to the hard-drive bracket.
7. Slide the bottom hard drive out of the hard-drive bracket.
NOTE:
Note the orientation of the hard drive so that you can replace it correctly.
24 Removing the 2.5-inch hard drive
To Next Page
Loading...
