3. Disconnect the optical-drive data cable from the system board.
4. Disconnect the power-supply unit cable from the system board.
5. Disconnect the hard-drive data cable from the system board.
6. Disconnect the hard drive and optical-drive power cable from the system board.
7. Disconnect the power-button module from the system board.
8. Disconnect the processor power-cable from the system board and remove the processor power-cable from the routing guides on the
chassis.
9. Remove the six screws (#6-32x6.35) that secure the system board to the chassis.
10. Slide and lift the system board at an angle to remove it from the chassis.
62
Removing the system board
To Next Page
Loading...
