14. processor-power cable connector (ATX CPU)
15. memory-module slot (DIMM 1)
16. memory-module slot (DIMM 2)
Left-side cover
Removing the left-side cover
Prerequisites
1. Follow the procedure in Before working inside your computer.
About this task
The following image(s) indicate the location of the left-side cover and provides a visual representation of the removal
procedure.
Steps
1. Remove the two thumb screws (6-32) that secure the left-side cover to the chassis.
2. Using the tab on the left-side cover, slide the cover towards the back of the computer and remove the left-side cover off
the chassis.
12
Removing and installing components
To Next Page
Loading...
