Installing the left-side cover
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the left-side cover and provides a visual representation of the installation
procedure.
Steps
1. Align the tabs on the left-side cover with the slots on the chassis, and slide it towards the front of the computer.
2. Replace the two thumb screws (6-32) that secure the left-side cover to the chassis.
Next steps
1. Follow the procedure in After working inside your computer.
Front cover
Removing the front cover
Prerequisites
1. Follow the procedure in Before working inside your computer.
Removing and installing components
13
To Next Page
Loading...
