Steps
1. Lay the computer with its left side facing up.
2. Locate the serial and parallel ports expansion card that is installed in the PCIe x1 card slot.
3. Lift the pull tab and open the expansion-card door.
4. Lift the serial and parallel ports expansion card from the PCIe x1 card slot.
Installing the serial and parallel ports expansion card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the serial and parallel ports expansion card and provides a visual representation
of the installation procedure.
32 Removing and installing components
To Next Page
Loading...
