2. Remove the left-side cover.
About this task
The following image(s) indicate the location of the front cover and provides a visual representation of the removal procedure.
Steps
1. Gently pry and release the front-cover tabs sequentially from the top.
2. Rotate the front cover outward from the chassis.
3. Remove the front cover from the chassis.
Installing the front cover
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the front cover and provides a visual representation of the installation procedure.
14
Removing and installing components
To Next Page
Loading...
