Installing the optical drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
NOTE: When installing the optional optical drive, ensure that the front cover of your computer has the slot for it.
The following image(s) indicate the location of the optical-drive bezel and provides a visual representation of the installation
procedure.
Steps
1. Place the optical-drive bezel on the optical drive, aligning the hooks on the optical-drive bezel with the slots on the optical
drive.
2. Press down on the optical-drive bezel to secure it into place on the optical drive.
Next steps
1. Install the optical drive.
2. Install the front cover.
3. Install the left-side cover.
4. Follow the procedure in After working inside your computer.
Media-card reader
Removing the media-card reader
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
Removing and installing components
43
To Next Page
Loading...
