● power-supply cables
● hard-drive cable
● power-button cable
4. Align the front I/O bracket to the front I/O ports and the screw holes on the chassis.
5. Replace the two screws that secure the front I/O bracket to the chassis.
Next steps
1. Install the processor.
2. Install the fan and heat-sink assembly.
3. Install the media-card reader.
4. Install the graphics card.
5. Install the hard drive.
6. Install the wireless card.
7. Install the solid-state drive.
8. Install the fan shroud.
9. Install the front cover.
10. Install the left-side cover.
11. Follow the procedure in After working inside your computer.
56 Removing and installing components
To Next Page
Loading...
