Table 13. System setup options—System Management menu (continued)
System Management
Default: ON
First Power On Date
Set Ownership Date Enable or disable setting of Ownership date.
Default: OFF
Table 14. System setup options—Keyboard menu
Keyboard
Keyboard Errors
Enable Keyboard Error Detection Enables or disables report of keyboard-related errors when the computer
boots.
Default: ON
Numlock LED
Enable Numlock LED Enables or disables Numlock when the computer boots.
Default: ON
Table 15. System setup options—Pre-boot Behavior menu
Pre-boot Behavior
Warnings and Errors
Warnings and Errors Selects an action on encountering a warning or error during boot.
Default: Prompt on Warnings and Errors. Stop, prompt, and wait for user input
when warnings or errors are detected.
NOTE: Errors deemed critical to the operation of the computer hardware
will always halt the computer.
Fastboot
Fastboot Configures the speed of the UEFI boot process.
Default: Thorough. Performs complete hardware and configuration initialization
during boot.
Extend BIOS POST Time
Extend BIOS POST Time Configures the BIOS POST (Power-On Self-Test) load time.
Default: 0 seconds
Table 16. System setup options—Virtualization menu
Virtualization
Intel Virtualization Technology
Enable Intel Virtualization Technology
(VT)
Enables the computer to run a virtual machine monitor (VMM).
Default: ON
VT for Direct I/O
Enable Intel VT for Direct I/O Enables the computer to perform Virtualization Technology for Direct I/O (VT-
d). VT-d is an Intel method that provides virtualization for memory map I/O.
Default: ON
System setup 67
To Next Page
Loading...
