Removing and Installing Parts 141
9
Replace the bezel (see "Replacing the Bezel" on page 122).
10
Replace the computer cover (see "Replacing the Computer Cover" on
page 160).
NOTICE: To connect a network cable, first plug the cable into the network device
and then plug it into the computer.
11
Connect your computer and devices to their electrical outlets, and turn
them on.
See the documentation that came with the drive for instructions on
installing any software required for drive operation.
1 CD/DVD drive 2 data cable 3 power cable
4 system board
connector
5 screw holes in the
CD/DVD drive bay
6 custom screws (2)
1
2
4
3
6
5
book.book Page 141 Monday, December 10, 2007 3:12 PM
To Next Page
Loading...
