NOTE: Repeat the steps to remove any other memory modules installed in your computer.
Installing the memory module
If you are replacing a component, remove the existing component before performing the installation procedure.
The following image indicates the location of the memory modules and provides a visual representation of the installation
procedure.
1. Lift the flap to access the memory-module slot.
2. Align the notch on the memory module with the tab on the memory-module slot.
3. Slide the memory module firmly at an angle, into the memory-module slot.
4. Press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
NOTE: Repeat the steps to install any other memory modules in your computer.
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
20
Removing and installing components
To Next Page
Loading...
