Installing the M.2 2230 solid-state drive
If you are replacing a component, remove the existing component before performing the installation procedure.
● If you are replacing a M.2 2280 solid-state drive with a M.2 2330 solid-state drive, ensure the M.2 2280 solid-state drive is
removed first.
● Refer to the procedure for removing the M.2 2280 solid-state drive.
● The following image indicate where to install the solid-state drive screw mount based on form factor.
This computer supports two solid-state drive form factors.
● M.2 2230
● M.2 2280
The following image indicates the location of the M.2 2230 solid-state drive and provides a visual representation of the
installation procedure.
Removing and installing components
29
To Next Page
Loading...
