1. Install the keyboard.
2. Install the system board.
NOTE:
The system board can be installed together with the heat sink attached. This simplifies the procedure and avoids
breaking the thermal bond between the system board and the heat sink.
3. Install the power-button board.
4. Install the power-adapter port.
5. Install the display assembly.
6. Install the I/O board.
7. Install the fan.
8. Install the M.2 2230 solid-state drive or M.2 2280 solid-state drive, as applicable.
9. Install the heat sink.
10. Install the wireless card.
11. Install the memory module.
12. Install the speakers
13. Install the coin-cell battery.
14. Install the touchpad.
15. Install the battery.
16. Install the base cover.
17. Follow the procedure in After working inside your computer.
Removing and installing components
55
To Next Page
Loading...
