108 I/O Board
Replacing the I/O Board
Procedure
1
Align the screw holes on the I/O board with the screw holes on the chassis.
2
Replace the screws that secure the I/O board to chassis.
3
Connect the display cable and AV-in cable to the connectors on
the I/O board.
4
Replace the screw that secures the grounding cable to the chassis.
5
Connect the main power cable to the system-board connector.
Postrequisites
1
Replace the I/O board shield.
See "Replacing the I/O Board Shield" on page 88.
2
Replace the I/O cover. See "Replacing the I/O Cover" on page 83.
3
Replace the BCAS card. See "Replacing the B-CAS card" on page 27.
4
Replace the power-supply fan bracket.
See "Replacing the Power-Supply Fan Bracket" on page 79.
5
Replace the system-board shield.
See "Replacing the System-Board Shield" on page 51.
6
Replace the VESA-mount bracket.
See "Replacing the VESA-Mount Bracket" on page 44.
7
Replace the back cover. See "Replacing the Back Cover" on page 24.
8
Replace the stand. See "Replacing the Stand" on page 21.
9
Follow the instructions in "After Working Inside Your Computer" on page 13.
OM_Book.book Page 108 Friday, March 30, 2012 1:21 PM
To Next Page
Loading...
