128 Display Panel
Replacing the Display Panel
Procedure
1
Align the screw holes on the display brackets with the screw holes on
the display panel.
2
Replace the screws that secure the display brackets to the display panel.
3
Gently place the display panel over the middle frame.
4
Place the chassis over the display panel and align the screw holes on the
chassis with the screw holes on the middle frame.
5
Replace the screws that secure the chassis to the middle frame.
6
Connect the display cable to the connector on the display panel.
Postrequisites
7
Follow the instructions from step 1 to step 3 in "Replacing the System
Board" on page 115.
8
Replace the processor heat-sink fan.
See "Replacing the Processor Heat-Sink Fan" on page 71.
9
Replace the processor heat-sink.
See "Replacing the Processor Heat-Sink" on page 67.
10
Replace the I/O board. See "Replacing the I/O Board" on page 108.
11
Replace the speakers. See "Replacing the Speakers" on page 63.
12
Replace the power-supply unit.
See "Replacing the Power-Supply Unit" on page 91.
13
Replace the I/O board shield.
See "Replacing the I/O Board Shield" on page 88.
14
Replace the I/O cover. See "Replacing the I/O Cover" on page 83.
15
Replace the B-CAS card. See "Replacing the B-CAS card" on page 27.
16
Replace the power-supply fan bracket.
See "Replacing the Power-Supply Fan Bracket" on page 79.
17
Replace the wireless mini-card.
See "Replacing the Wireless Mini-Card" on page 59.
OM_Book.book Page 128 Friday, March 30, 2012 1:21 PM
To Next Page
Loading...
