I/O Cover 83
Replacing the I/O Cover
Procedure
Place the I/O cover over the I/O board shield and snap it into position.
Postrequisites
1
Replace the B-CAS card. See "Replacing the B-CAS card" on page 27.
2
Replace the back cover. See "Replacing the Back Cover" on page 24.
3
Replace the stand. See "Replacing the Stand" on page 21.
4
Follow the instructions in "After Working Inside Your Computer" on page 13.
OM_Book.book Page 83 Friday, March 30, 2012 1:21 PM
To Next Page
Loading...
