System-Board Shield 51
Replacing the System-Board Shield
Procedure
1
Align the screw holes on the system-board shield with the screw holes
on the chassis.
2
Replace the screws that secure the system-board shield to the chassis.
Postrequisites
1
Replace the VESA-mount bracket.
See "Replacing the VESA-Mount Bracket" on page 44.
2
Replace the back cover. See "Replacing the Back Cover" on page 24.
3
Replace the stand. See "Replacing the Stand" on page 21.
4
Follow the instructions in "After Working Inside Your Computer" on page 13.
OM_Book.book Page 51 Friday, March 30, 2012 1:21 PM
To Next Page
Loading...
