Power-Supply Fan Bracket 79
Replacing the Power-Supply Fan Bracket
Procedure
1
Align the screw hole on the power-supply fan bracket with the screw hole
on the chassis.
2
Replace the screw that secures the power-supply fan bracket to the chassis.
3
Connect the B-CAS card cable to the connector on the B-CAS card.
Postrequisites
1
Replace the back cover. See "Replacing the Back Cover" on page 24.
2
Replace the stand. See "Replacing the Stand" on page 21.
3
Follow the instructions in "After Working Inside Your Computer" on page 13.
OM_Book.book Page 79 Friday, March 30, 2012 1:21 PM
To Next Page
Loading...
