System-Board Shield 49
System-Board Shield
WARNING: Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 11.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Removing the System-Board Shield
Prerequisites
1
Remove the stand. See "Removing the Stand" on page 19.
2
Remove the back cover. See "Removing the Back Cover" on page 23.
3
Remove the VESA-mount bracket.
See "Removing the VESA-Mount Bracket" on page 43.
OM_Book.book Page 49 Friday, March 30, 2012 1:21 PM
To Next Page
Loading...
