Converter Board 31
Replacing the Converter Board
Procedure
1
Align the screw holes on the converter board with the screw holes
on the chassis.
2
Replace the screws that secure the converter board to the chassis.
3
Connect the converter-board cable and display-backlight cable to the
connectors on the convertor board.
Postrequisites
1
Replace the back cover. See "Replacing the Back Cover" on page 24.
2
Replace the stand. See "Replacing the Stand" on page 21.
3
Follow the instructions in "After Working Inside Your Computer" on page 13.
OM_Book.book Page 31 Friday, March 30, 2012 1:21 PM
To Next Page
Loading...
