88 I/O Board Shield
Replacing the I/O Board Shield
Procedure
1
Connect the power-supply fan cable and infrared cable to the
system-board connectors.
2
Connect the antenna cable to the connector on the TV tuner card.
3
Slide the power port and the power-supply control board through the slot
on the I/O board shield.
4
Align the screw holes on the I/O board shield with the screw holes
on the chassis.
5
Replace the screws that secure the I/O board shield to the chassis.
6
Replace the screw that secures the power-supply control board to the
I/O board shield.
7
Replace the screws that secure the power port to the I/O board shield.
Postrequisites
1
Replace the I/O cover. See "Replacing the I/O Cover" on page 83.
2
Replace the B-CAS card. See "Replacing the B-CAS card" on page 27.
3
Replace the power-supply fan bracket.
See "Replacing the Power-Supply Fan Bracket" on page 79.
4
Replace the system-board shield.
See "Replacing the System-Board Shield" on page 51.
5
Replace the VESA-mount bracket.
See "Replacing the VESA-Mount Bracket" on page 44.
6
Replace the back cover. See "Replacing the Back Cover" on page 24.
7
Replace the stand. See "Replacing the Stand" on page 21.
8
Follow the instructions in "After Working Inside Your Computer" on page 13.
OM_Book.book Page 88 Friday, March 30, 2012 1:21 PM
To Next Page
Loading...
